Tag Archive for wireless

Wireless Adapter Driver Needed

wmp11A reader asks:

I recently purchased a new computer, and installed the wireless adapter from my old PC in it, but I haven’t been able to get it to work at all. The labelling says it’s a Linksys Wireless B WMP11 adapter. Where can I get the software to make it work?

I’m assuming you have a Windows computer. I’m surprised it didn’t just work with the Windows drivers, but your wireless device may be about 6 or 7 years old, as it was initially released around 2002.

Regardless, you can download the driver for the Linksys WMP11 Wireless-B PCI adapter here:


But you will need to know which “version” of the adapter card you have. The two versions are Version 4.0 (2003) and Version 2.7 (2002). This information can be found printed on the adapter card, but you might need to remove it again in order to get this information. It should be imprinted on the blue and black label you see in the picture above.

If you have version 4.0 you will see that there is a Setup Wizard which can be downloaded to help you configure the device. My link in the prior sentence will take yoy directly to the download page for it.

Linksys also provides instructions for updating the driver here:


Feel free to contact me if you run into trouble.

Do I have wireless on my laptop?

A reader sent the following messages the other day on Twitter:

I am almost certain my laptop doesn’t have a wireless card.
How can I check whether I have a wireless adapter?
If I don’t, which one should I purchase?
Tell me how to check if there’s a wireless card internal.

My first suggestion was to go to the manufacturer’s web site and look up the model number of the laptop, but once they asked how to check the laptop directly, this is the approach I suggested:

Assuming you have a Windows computer, try this:

  1. Click Start > Control Panel > System
  2. Click Hardware > Device Manager
  3. Click the “+” by “Network Adapters”
  4. See if a “wireless” device is listed.

The common wireless designations/varieties are B, G, and N. G being the oldest form, and N the newest. (No, N is not for New. At least, I don’t think so. Anybody know?) Many of the newer ones are backwards compatible, so a G can receive B and G, and many N’s can receive all 3. N adapters are a little expensive, and if the wireless router/transmitter isn’t using N, then there is no advantage. So, I usually recommend getting a Wireless G adapter.

Most wireless adapters are about the same in price. I’d recommend getting one that supports Wireless B and G. You can either get them with a PCMCIA connection or a USB connector. USB is the most versatile. Linksys and D-Link are good wireless adapters. They cost about $40 to $60 at Best Buy or Staples.


I am an avid proponent of wireless security. I also prefer wired connections over wireless connections. In urban and suburban areas there are too many sources of interference from other wireless devices, neighboring wireless networks, cordless phones, Bluetooth devices, and microwave ovens. So if you intend on using wireless frequently, I recommend installing Network Magic from Pure Networks (A Cisco company) on your laptop. If you are using wireless at home, you can install it on any other computers in your household. I have seen Network Magic solve countless problems with home wireless networks.

Network Magic 20% Off NMEASY coupon code spring banner 468x60

Got a story to share? Have a question? Post Comments or Questions with the link below. Keep up-to-date with Skylarking: By Email or RSS Newsfeed or on Twitter. You can also send questions with Skylarking’s email form.